Terminator 3 (T3) Chelsio Windows Driver Install Guide  New Driver Installation
 Changing driver parameters (e.g. MTU)
Driver Update
Download the Windows Driver After you have finished installing the Chelsio NIC in the system (as per the manufacturer’s recommendations), power the machine on. Step 1:  | Select: No, not this time Click Button: Next > |
Step 2:  | Select:Install from a list or specified location (Advanced) Click Button: Next > |
Step 3:  |
Select: Search for the best driver in these locations
Select:Include this location in the search
| | Click Button: Browse and select the path to where the Chelsio driver resides | Click Button: Next > |
Step 4:  | You might see a warning saying: "the Chelsio driver has not passed Windows Logo" Click Button: Continue anyway |
Step 5:  | You will see a message saying: "Chelsio Ethernet Function Enumerator was installed" Click Button: Finish |
Step 6:  | Repeat steps 1 through 5 for the T3Ndis function driver till you reach the following screen. | Click Button: Finish The Chelsio driver is now successfully installed!
Please note: If you have a dual port card you have to repeat steps 1 though 6 for the second port. |
Step 1:  | Click on: Start menu Right Click: My Computer Click on: Properties |
 | Click Tab: Hardware Click Button: Device Manager |
 | Note: You will see the Chelsio drivers installed under: • Mulitfunction Adapters • Network Adapters |
 | Right Click on: "Chelsio Ethernet Function Enumerator" under Multifunction Adapter Click On: Properties |
 | Click Tab: Advanced Note: This example shows you how to change the MTU size. For any other change in Property follow the same procedure and then change the value. Click On: Ethernet Port 0 MTU Select Value: Change Value to the one of your choice. This example changes it to 9000 Note: If you are using a dual port card you may choose to change the MTU size of Ethernet Port 1 in the same fashion. Your MTU has been successfully updated! |
Step 1:
Make sure you have downloaded the latest version of the Chelsio driver from http://service.chelsio.com  | Click On: Start menu Right Click: My Computer Click On: Properties |
| Click Tab: Hardware Click Button: Device Manager |
| Note: You will see the Chelsio drivers installed under: • Mulitfunction Adapters • Network Adapters |
 | Right Click On: Chelsio Product ID Ethernet Function Enumerator Click On: Update Driver Follow Steps 2-5 of the New Driver Installation instructions |
 | Repeat step 1 to 3 of Driver Update instructions to come to this screen Right Click: Chelsio T3 Ndis Function Driver Click On:Update Driver Follow Steps 2-5 of the New Driver Installation instructions You have now successfully upgraded your driver! If you have any questions please email Chelsio support at support@chelsio.com |
| 
