High Performance,Dual Port 40GbE Unified Wire Adapter
Enables TCP Offload over Single Unified Wire with SR-IOV, EVB/VNTag, DCB
Chelsio’s T580-SO-CR is a memory free dual-port 40 Gigabit Ethernet Unified Wire adapter with a PCI Express 3.0 host bus interface, optimized for cloud computing, virtualization, storage, and other data center applications.
This adapter, based on the fifth-generation (T5) technology from Chelsio provides the highest 40GbE performance available and dramatically lowers host-system CPU communications overhead with on-board hardware that off-loads TCP/IP processing from its host system. T580-SO-CR frees up host CPU cycles for useful applications. The system achieves increased bandwidth, lower latency, and uses less power.
The Unified Wire Solution
With the T580-SO-CR, Chelsio is enabling a unified wire for LAN, SAN, and cluster traffic. This unified wire was made possible by the high bandwidth and low latency of 40GbE combined with storage and cluster protocols operating over TCP/IP. In parallel, operating systems and hypervisors have incorporated native support for iSCSI and database applications are now supporting file-based storage protocols such as NFS as an alternative to SANs.
T580-SO-CR includes a full-fledged integrated Traffic Manager for robust flow control, traffic management, and QoS.
The adapter’s two ports and IEEE 802.3ad link aggregation/failover features are ideal for critical network applications that require redundancy and high-availability capabilities.
T580-SO-CR Ethernet-only networking reduces the data center’s cost in network adapters, cables, switches, rack space, power, equipment spares, management tools, planning, networking skills and installation.
T5 – Fifth-Generation Protocol Offload Engine
The T5 is Chelsio’s fifth-generation TCP offload (TOE) design, fourth-generation iSCSI design, and third-generation iWARP (RDMA) implementation. For the server connection, the T5 chip included a PCI Express v3.0 x8 host bus interface. With support for the 8 Gbps Gen 3 data rate, the PCIe interface provides up to 64 Gbps for bandwidth to the server. T5 also provides support for PCIe I/O virtualization. On this External Memory Free version of the adapter, a maximum of 32 offloaded TCP/IP connections is supported that are meant to be used in a low Round-Trip-Time (RTT) environment. Most of the T5 features are carried over from those found on T4
The T5 has hundreds of programmable registers for protocol configurations, RFCs, and offload control. The T580-SO-CR can offload processing per connection, per-server, per-interface, and globally and simultaneously tunnel traffic from non-offloaded connections to the host processor for the native TCP/IP stack to process. The T580-SO-CR provides a flexible zero-copy capability for regular TCP connections, requiring no changes to the sender, to deliver line rate performance at minimal CPU utilization.
Packet Switching and Routing
T580-SO-CR integrates a high performance packet switch, which allows switching traffic from any of the input ports to any of the output ports (wire-to-wire) and from any of the output ports to any of the input ports (host-to-host).
Robust, Proven Solution
Subjected to thousands of hours of compatibility testing, over multiple years of stress testing by several OEM test suites and production deployment in servers, storage systems, and cluster computing, Chelsio’s robust, stable protocol oﬄoad technology delivers proven performance in a wide range of environments. The T580-SO-CR is generations ahead of competing products.
Chelsio offers a full suite of protocol software drivers with the T580-SO-CR adapters. See Support Page for the latest information. The software supports operation in both protocol-offload and non-offload modes.
Physical Interface: 40GBASE-SR4*
Media: MMF or SMF.
*QSFP+ optics sold separately. Only Chelsio-supplied modules may be used.
SM40G-SR:40G short-reach QSFP+ optical module
OCTTAPCABLE3M:QSFP+-to-4xSFP+ Twinax Passive Cable
QSRCABLE10M:10m QSFP+-to-QSFP+ SR Optical Cable
QTAPCABLE1M:1m QSFP+-to-QSFP+ Twinax Passive Cable
QTAPCABLE3M:3m QSFP+-to-QSFP+ Twinax Passive Cable
QTAPCABLE5M:5m QSFP+-to-QSFP+ Twinax Passive Cable